Appendix E Cisco Secure ACS Command-Line Database Utility
User-Defined RADIUS Vendors and VSA Sets
E-28
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Adding a Custom RADIUS Vendor and VSA Set
You can use the -addUDV option to add up to ten custom RADIUS vendors and
VSA sets to Cisco Secure ACS. Each RADIUS vendor and VSA set is added to
one of ten possible user-defined RADIUS vendor slots.
Note While CSUtil.exe adds a custom RADIUS vendor and VSA set to
Cisco Secure ACS, all Cisco Secure ACS services are automatically stopped
and restarted. No users are authenticated while this process is occurring.
Before You Begin
• Define a custom RADIUS vendor and VSA set in a RADIUS vendor/VSA
import file. For more information, see the .
• Determine the RADIUS vendor slot to which you want to add the new
RADIUS vendor and VSAs. For more information, see the “Listing Custom
RADIUS Vendors” section on page E-30.
To add a custom RADIUS VSA to Cisco Secure ACS, follow these steps:
Step 1 On the Cisco Secure ACS server, open an MS DOS command prompt and change
directories to the directory containing CSUtil.exe. For more information about the
location of CSUtil.exe, see the “Location of CSUtil.exe and Related Files” section
on page E-2.
Step 2 Type:
CSUtil.exe -addUDV slot-number filename
where slot-number is an unused Cisco Secure ACS RADIUS vendor slot and
filename is the name of a RADIUS vendor/VSA import file. filename can include
a relative or absolute path to the RADIUS vendor/VSA import file. Press Enter.
For example, to add the RADIUS vendor defined in
d:\acs\myvsa.ini to slot 5,
the command would be:
CSUtil.exe -addUDV 5 d:\acs\myvsa.ini
Result: CSUtil.exe displays a confirmation prompt.
To Next Page
Loading...
Need help?
General