8-43
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 8 Establishing Cisco Secure ACS System Configuration
Cisco Secure ACS Backup
Scheduling Cisco Secure ACS Backups
You can schedule Cisco Secure ACS backups to occur at regular intervals or at
selected days of the week and times.
To schedule the times at which Cisco Secure ACS performs a backup, follow
these steps:
Step 1 In the navigation bar, click System Configuration.
Step 2 Click ACS Backup.
Result: The ACS System Backup Setup page appears.
Step 3 To schedule backups at regular intervals, under ACS Backup Scheduling, select
the Every X minutes option and in the X box type the length of the interval at
which Cisco Secure ACS should perform backups.
Note Because Cisco Secure ACS is momentarily shut down during backup,
if the backup interval is set too low, users might be unable to
authenticate.
Step 4 To schedule backups at specific times, follow these steps:
a. Under ACS Backup Scheduling, select the At specific times option.
b. In the day and hour graph, click the times at which you want
Cisco Secure ACS to perform a backup.
Tip Clicking times of day on the graph selects those times; clicking again clears
them. At any time you can click Clear All to clear all hours, or you can click
Set All to select all hours.
Step 5 To change the location where Cisco Secure ACS writes backup files, type the
drive letter and path in the Directory box.
To Next Page
Loading...
Need help?
General