Chapter 11 Working with User Databases
Novell NDS Database
11-24
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
In the Admin DN box, type the following information from your LDAP
server:
uid=user id,[ou=organizational unit,][ou=next organizational
unit
]o=organization
where user id is the username
organizational unit is the last level of the tree
next organizational unit is the next level up the tree.
For example:
uid=joesmith,ou=members,ou=administrators,o=cisco
Tip If you are using Netscape DS, you can copy this information from the
Netscape Console.
For more information, refer to your LDAP database documentation.
g. In the Password box, type the password for the administrator account
specified in the Admin DN box. Password case sensitivity is determined by
the server.
Step 21 Click Submit.
Result: Cisco Secure ACS saves the generic LDAP configuration you created.
You can now add it to your Unknown User Policy or assign specific user accounts
to use this database for authentication. For more information about the Unknown
User Policy, see the “Unknown User Processing” section on page 12-1. For more
information about configuring user accounts to authenticate using this database,
see Chapter 7, “Setting Up and Managing User Accounts.”
Novell NDS Database
Cisco Secure ACS supports PAP authentication with Novell NetWare Directory
Services (NDS) servers. To use NDS authentication, you must have a Novell NDS
database. Configuring Cisco Secure ACS to authenticate against an NDS
database does not affect the configuration of the NDS database. To manage your
NDS database, refer to your NDS database documentation.
To Next Page
Loading...
Need help?
General