5-15
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 5 Setting Up and Managing Shared Profile Components
Command Authorization Sets
Adding a Command Authorization Set
To add a command authorization set, follow these steps:
Step 1 In the navigation bar, click Shared Profile Components.
Result: The Shared Profile Components page lists the command authorization set
types available. These always include Shell Command Authorization Sets and
PIX Command Authorization Sets.
Step 2 Click one of the listed command authorization set types, as applicable.
Result: The selected Command Authorization Sets table appears.
Step 3 Click Add.
Result: The applicable Command Authorization Set page appears.
Step 4 In the Name box, type a name for the command authorization set
Note The set name can contain up to 32 characters. Names cannot contain
the following special characters:
# ? " * > <
Leading and trailing spaces are not allowed.
Step 5 In the Description box, type a description of the command authorization set.
Step 6 To specify how Cisco Secure ACS is to handle unmatched commands, select
either the Permit or Deny option, as applicable.
Tip The default setting is Deny.
To Next Page
Loading...
Need help?
General