5-17
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Chapter 5 Setting Up and Managing Shared Profile Components
Command Authorization Sets
Editing a Command Authorization Set
To edit a command authorization set, follow these steps:
Step 1 In the navigation bar, click Shared Profile Components.
Result: The Shared Profile Components page lists the command authorization set
types available.
Step 2 Click a command authorization set, as applicable.
Result: The selected Command Authorization Sets table appears.
Step 3 From the Name column, click the name of the set you want to change.
Result: Information for the selected set appears on the applicable Command
Authorization Set page.
Step 4 Do any or all of the following:
a. To change the set’s Name or Description, edit the words in the corresponding
box.
b. To remove a command from the set, from the Matched Commands list, select
the command, and then click Remove Command.
c. To edit a command’s arguments, from the command list box, select the
command and then type changes to the arguments in the box to the right of
the command list box.
Step 5 When you have finished editing the set, click Submit.
Deleting a Command Authorization Set
To delete a command authorization set, follow these steps:
Step 1 In the navigation bar, click Shared Profile Components.
Result: The Shared Profile Components page lists the command authorization set
types available.
Step 2 Click a command authorization set, as applicable.
Result: The selected Command Authorization Sets table appears.
To Next Page
Loading...
Need help?
General