Chapter 7 Setting Up and Managing User Accounts
Advanced User Authentication Settings
7-30
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Step 4 To assign the PIX command authorization set at the group level, select the As
Group option.
Step 5 To assign a particular PIX command authorization set to be effective on any
configured network device, follow these steps:
a. Select the Assign a PIX Command Authorization Set for any network
device option.
b. From the list directly below that option, select the PIX command
authorization set you want applied to this user.
Step 6 To create associations that assign a particular PIX command authorization set to
be effective on a particular NDG, for each association, follow these steps:
a. Select the Assign a PIX Command Authorization Set on a per Network
Device Group Basis option.
b. Select a Device Group and an associated Command Set.
c. Click Add Association.
Result: The associated NDG and PIX command authorization set appear in
the table.
Step 7 Do one of the following:
a. If you are finished configuring the user account options, click Submit to
record the options.
b. To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
To Next Page
Loading...
Need help?
General