4-3
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
OL-10100-11
Chapter 4 Troubleshooting Route Switch Processors and Supervisor Engines
RSP720-10GE Supported Chassis, Line Cards, and Modules
RSP720-10GE Supported Chassis, Line Cards, and Modules
The RSP720-10GE supports the following chassis and modules:
• Cisco 7604 and 7609 chassis and the Cisco 7603-S, 7606-S, and 7609-S chassis.
• If you insert an RSP720-10GE into an unsupported chassis, the RSP720-10GE drops to ROMMON
and only the console is accessible.
• SPA interface processors (SIPs) and their shared port adapters (SPAs): 7600-SIP-600,
7600-SIP-400, and 7600-SIP-200.
• Enhanced FlexWAN module (WS-X6582-2PA).
• Ethernet services modules: 2-port 10 GE line card (7600-ESM-2X10GE) and 20-port 1 GE line card
(7600-ESM-20X1GE).
• All boards in the ES+ family of line cards.
• Distributed Forwarding Cards: DFC3C, DFC3CXL, DFC3B, DFC3BXL
• All LAN cards.
RSP720-10GE Unsupported Chassis, Modules and Features
The RSP720-10GE does not support the following chassis and modules:
• Cisco 7603, 7606, and 7613 chassis.
• Services modules, Optical Service Modules (OSMs), FlexWAN module.
• RSP720-10GE does not support High Availability features in 12.2(33)SRC and 12.2(33)SRD.
Obtaining Technical Assistance
If you are unable to solve a problem on your own based on the solutions provided, consult a Cisco
customer service representative for assistance. When you call, ensure that you have the following
information:
• Chassis and module serial number.
• Card information: Use the show module and show inventory command to determine which cards
are installed.
• Cisco IOS software release number: Use the show version command to determine this number.
• Brief description of the symptoms and steps to isolate and solve the problem.
• Maintenance agreement or warranty information.
• ROM images. (Use the show version exec command.)
• Programmable ROM labels. (This information is printed on the physical chip, and an example is
shown in Figure 4-1.)