Clarion CZ302E User Manual

English
8
CZ302E
CD/MP3/WMA Operations
1. Push the cap of the USB connector to the
right. Insert a USB cable (CCA-755) into the
USB connector. Insert a USB device into
the USB cable.
When connecting a USB device, the unit will
read the les automatically.
2. To remove the USB device, you should rst
select another source or turn off the power,
in order to avoid damaging the USB device.
Then take off the USB device. Push the cap
to the left.
3. Operation is same as MP3/WMA operation.
USB Operations
iPod & iPhone Operations
iPod & iPhone Operations
CCA-755
to monitor
CCA-748
Connect
Connect an iPod or iPhone to the USB
connector via CCA-748 cable.
When connecting a device, the unit will read the
les automatically. The track information display
on the screen once playback start.
MENU
In the S-CTRL OFF mode, press
[MENU /
] button,rotate the [VOLUME]
knob select “MUSIC” or “VIDEO”.
Select “MUSIC”, press the [VOLUME]
knob, then rotate the [VOLUME] knob to
show PLAY LISTS / ARTISTS / ALBUMS
/ GENRES / SONGS / COMPOSERS, press
and rotate the [VOLUME] knob to select a
desired option, then press the [VOLUME] knob
to conrm.
Select “VIDEO”, press the [VOLUME] knob,
then rotate the [VOLUME] knob to show
MOVIES / MUSIC VIDEOS / TV SHOWS/
VIDEO PODCASTS / RENTALS, press and
rotate the [VOLUME] knob to select a desired
option, then press the [VOLUME] knob to
conrm
NOTE:
• VIDEO MENU item is different by the model
of connected iPod and language setting.
Repeat play
This function allows you to play the current
track repeatedly or play all tracks in your iPod/
iPhone repeatedly.
1. Press the [ 2 ] button once or more until
“RPT ON” appears on the LCD to perform
repeat play.
2. Press [ 2 ] button repeatedly until “RPT
OFF” appears on the LCD to cancel repeat
playback.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
1. Press [ 3 ] button repeatedly until “ALBUM
RDM” appears on the LCD for album random
play.
2. Press the [ 3 ] button once or more until
“SONG RDM” appears on the LCD to
perform random play.
3. Press [ 3 ] button repeatedly until “RDM
OFF” appears on the LCD to cancel random
playback.
Setting iPod simple control mode
Use this function if you wish to operate through
your iPod connected to this unit via the USB
cable.
* The factory default setting is “ OFF “.
1. Press and hold [DISP] button to enter
system setup.
2. Press [
] or [ ] button to select
“ S-CTRL“.
3. Rotate the [VOLUME] knob to select
“ ON “ or “ OFF “ .
• ON: Operations are made through your iPod.
• OFF: Operations cannot be made through
your iPod.
Notes:
• When performing iPod operations using
simple control mode, make the operations
slowly. If repetitive operations are
performed too quickly, unforeseen errors
may occur.
• When performing iPod operations using
simple control mode, please do not
operate the iPod and the unit at the same
time, otherwise there may be unexpected
event happened.
• Some iPod models do not support this
function. Consult your nearest Clarion
dealer or website to conrm which models
do not support this function.
iPod menu alphabet search
This function searches the subfolders for
desired alphabetical letters.
1. Press the [MENU /
] button to select the
iPod menu mode.
2. Press the [VOLUME] knob to switch
between categories.
MUSIC: PLAYLIST, ARTISTS, ALBUMS,
GENRES, SONGS, COMPOSERS
VIDEO: MOVIES, MUSIC VIDEOS, TV
SHOWS VIDEO PODCASTS, RENTALS
3. Press the [VOLUME] knob. (The contents
of the category are displayed.)
4. Press and hold the [ DISP ] button (1 sec.).
5. Rotate the [VOLUME] knob to select the
desired letter to search.
6. Press the [DISP] button again to next
perform search.
7. Press the [ VOLUME ] knob to conrm.
Top function
The top function resets the CD player to the
rst track of the disc. Press and hold the [ 4 ]

1) on the disc.
* In case of MP3/WMA, the rst track of the
current folder will be played.
Other various play functions
Scan play
This function allows you to locate and play the
rst 10 seconds of all the tracks recorded on
a disc.
Press the [ 1 ] button to perform scan play.
Repeat play
This function allows you to play the current track
repeatedly or play a track currently being played
in the MP3/WMA folder repeatedly.
CD:
1. Press the [ 2 ] button once or more until
“RPT ON” appears on the LCD to perform
repeat play.
2. Press [ 2 ] button again to cancel repeat
playback, “RPT OFF” appears on the
LCD.
MP3/WMA:
1. Press the [ 2 ] button once or more until
“TRACK RPT” appears on the display to
perform repeat play, and “RPT” segment
lights on.
 [ 2 ] button
repeatedly until “FOLD RPT” appears on
the display for folder repeat play.
3. Press [ 2 ] button repeatedly until “RPT
OFF” appears on the display to cancel
RPT” segment

Random play
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [ 3 ] button to perform random
play.
Random function activates when jumping
to another track.

Clarion CZ302E Specifications

General

MP3 playback	Yes
Audio formats supported	MP3, WMA
USB version	2.0
Bluetooth profiles	A2DP, AVRCP, HFP, HSP, PBAP
Line outputs (RCA)	4
USB ports quantity	1
DIN size	-
Output power	80 W
Product color	Black
Volume control	Rotary
Frequency range	20 - 20000 Hz
Disc types supported	CD
Audio output channels	4.0 channels
Maximum power per channel	20 W
Signal-to-Noise Ratio (SNR)	94 dB
FM band range	87.5 - 108 MHz
Supported radio bands	FM, LW, MW
Display type	LCD

Weight and Dimensions

Weight	1350 g
Dimensions (WxDxH)	188 x 190 x 58 mm