Inteli NT GeCon MINT, SW Version 1.4, ©ComAp – June 2007
IGS-NT-GeCon-MINT-1.4.PDF
5
General description
Description of the controller system (with all options)
NT Family controllers are comprehensive AMF-controllers for single and multiple generating sets operating
in stand-by or parallel modes. A modular construction allow upgrades to different levels of complexity in
order to provide the best solution for various customer applications.
NT Family controllers are equipped with a powerful graphic display showing icons, symbols and bar-graphs
for intuitive operation, which sets, together with high functionality, new standards in Gen-set controls.
The controller automatically starts the gen-set, closes the Gen-set C.B. when all conditions are met, then
stops the engine on external signal or by pressing push buttons.
Parallel to the Mains operation is a standard feature. Isolated parallel and Power Management System
support are optional. Forward and reverse synchronizing, Generator protections, Mains protection including
vector shift, load and power factor control are the major functions provided. Interfacing to foreign
synchronizers and load sharers is supported.
The key feature of the controller is its easy-to-use operation and installation. Predefined configurations for
typical applications are available as well as user-defined configurations for special applications.
Comparing of IG-NT-GeCon-1.3 to the standard IG-NT-MINT-2.0
• GeCon does not take care of Engine control – option adjustable by setpoints.
• GeCon does not directly control GCB – option adjustable by setpoints.
• GeCon accepts external – “by hand” Engine and GCB control.
• GeCon can control the engine via Binary start/stop output signals only – see below. The independent
Engine controller (e.g. ID-DCU) is expected.
• Synchronizing and unloading timeouts can be disabled by setpoint setting (or Force value function).
• Interface GeCon to engine controller is provided by I/O wires no by communication line.
Available documentation
IGS-NT-Application guide-2.1.pdf
IGS-NT-Installation guide-2.1.pdf
IGS-NT-Operator guide-2.1.pdf
GenConfig-2.1.pdf
InteliMonitor-2.1.pdf
Application examples.
All modules wiring.
Brief panel buttons, display handling guide.
PC configuration tool guide.
PC monitoring tool guide.
To Next Page
Loading...
Need help?
General
