Crestron 1 Beyond AutoTracker 3 Series User Manual

15 • IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-
SLVR-1B
Product Manual — Doc.
9323C
Mounting Requirements
For the optimum tracking performance:
l
Mount the camera upright with a clear view of the area where the subject will be tracked.
l
The camera should be mounted 15-50ft (5-15m)from the subject and at a height of 7-12ft (2-
4m).
l
The fixed wide-angle camera lens must be able to see the entire area that the subject will be
tracked in as it is used by the tracking algorithm for motion detection.
l
The area in which the subject will be tracked in must be in the top half (ideally in the top third) of
the wide-angle camera’s field of view. Positioning the camera where the wide-angle covers
predominately the ceiling will result in sub-optimal tracking performance. If the room slants down,
the camera should be positioned at a slant as well.
l
Mount the camera as close as possible to the central axis of the area where the subject will be
tracked. This is commonly the center of the back wall.
Mounting Options
The AutoTracker camera can be mounted on a wall using the included wall mount kit or suspended from
the ceiling using the J-mount kit (sold separately).
NOTE: Do not tilt the camera more than 15° to maintain optimum tilt and pan accuracy.

Crestron 1 Beyond AutoTracker 3 Series Specifications

General

Brand	Crestron
Model	1 Beyond AutoTracker 3 Series
Category	Security Camera
Language	English