Product Manual — Doc.
9323C
IV-CAMA3-20-N-W-1B, IV-CAMA3-20-N-SLVR-1B, IV-CAMA3-20-W-1B, and IV-CAMA3-20-SLVR-
1B • 8
High Quality Video
A high quality Sony Exmor® CMOS sensor enables the camera to output up to 1080p60 resolution video
via the 3G-SDI port. The AutoTracker works well in low light and in front of bright screens.
Manual Control Options
Use VISCA over IP to control the camera with a Crestron® control system. 1B Cam Manager Software is
included for easy configuration from a computer on the network.
Networked Power, Stream, and Control
Connect a single Ethernet cable to power (PoE+), monitor, set up, and control the AutoTracker camera.
Quiet, Fast Switching Between Presets
Up to 256 pan, tilt, and zoom combination presets can be configured. The camera will move to the
selected preset point. A quiet, fast motor (120°/s pan speed) sets camera angles quickly.
Multicamera Capability with Automate Systems
Add the AutoTracker camera to an Automate multicamera system. Automate can be set to autoswitch
between multiple 1 Beyond cameras to focus on the active speaking participant. Incorporate popular
microphones and DSPs to switch between the presenter and audience.
Mounting Options
Standard mounting holes make it easy to mount the camera to a wall mount (included) or a J-Mount
ceiling bracket (sold separately).
NDI|HX for High Quality Network Video
NDI|HX supports efficient and flexible IP configuration with other networked NDI-enabled devices.
NDI|HX allows for easy installation and scalability with a single network pull (only supported on the IV-
CAMA3-20-N-W-1B and IV-CAMA3-20-N-SLVR-1B).
NOTE:NDI|HX is only supported on the IV-CAMA3-20-N-W-1B and IV-CAMA3-20-N-SLVR-1B
AutoTracker cameras.
To Next Page
Loading...
Need help?
General
