Crestron Mercury CCS-UC-1 User Manual

Product Manual – DOC. 7844M CCS-UC-1: Crestron Mercury Tabletop Conference System • 7
The EDID section of the HDMI INPUT screen specifies the EDID profile that is selected
for use. Only source devices that use the selected EDID profile are allowed to send
signals through the CCS-UC-1.
To select an EDID profile to support, select one of the profiles from the drop-down list,
and click
Apply EDID.
If a profile is not listed in the menu, a custom profile can be loaded onto the device. To
load a custom EDID profile, follow this procedure:
1. From the Select drop-down list, select Custom.
2. Click Load CEDID file.
3. Click Browse and navigate to the location of the custom CEDID file.
4. Select the file to use and click Open.
5. Click Send EDID.
Input Signal
Click More Details to view details about the input signal connected to the HDMI input
port.
HDMI OUTPUT
Click HDMI OUTPUT to display information about the connected display and output
signal.
Click More Details to view details about the connected display and the output signal
sent to the HDMI output port.
HDMI OUTPUT Screen

Crestron Mercury CCS-UC-1 Specifications

General

Brand	Crestron
Model	Mercury CCS-UC-1
Category	Conference System
Language	English