Crestron Mercury CCS-UC-1 User Manual

2 • CCS-UC-1: Crestron Mercury Tabletop Conference System Product Manual – DOC. 7844M
Operating Environment
NOTE: If the CCS-UC-1 is powered with PoE+ (IEEE 820.3at), PoE+ switches that
utilize Link Layer Discovery Protocol (LLDP) must have LLDP enabled. Please
coordinate with the IT Administrator who manages network infrastructure at the
customer site to make sure the PoE+ ports have LLDP enabled. For more information,
refer to “Troubleshooting” on page 101.
The CCS-UC-1 requires the following to make the most of its capabilities.
• Crestron Fusion software
• SIP Server
• Microsoft Exchange Server® software
Accessories
The CCS-UC-1 is available in several different models with a variety of accessories for a
custom installation. Visit www.crestron.com/direct/ccs-uc-1
for more information. Other
models are available as well. Refer to the model name listed on the underside of the
device.
Configuration
Requirements
Configuration requires a computer with web browser software. The CCS-UC-1 and
computer must be connected to a commonly accessible network.
Connect to the Device
To connect to the device, follow this procedure:
1. On the device, tap . An information screen is displayed.

Crestron Mercury CCS-UC-1 Specifications

General

Brand	Crestron
Model	Mercury CCS-UC-1
Category	Conference System
Language	English