Product Manual – DOC. 7844M CCS-UC-1: Crestron Mercury Tabletop Conference System • 1
CCS-UC-1:
Crestron Mercury Tabletop Conference
System
Introduction
The CCS-UC-1 Crestron Mercury® Conference Room System provides a single tabletop
device that allows for room scheduling, presenting, conference calling, and video calling.
For more information on features, capabilities, and specifications on the CCS-UC-1 and
its accessories, visit www.crestron.com/mercury
.
NOTE: Crestron has created several variations of the CCS-UC-1 for a variety of
applications. Except where noted, the term “CCS-UC-1” will be used to describe all
versions of the CCS-UC-1.
This product manual discusses the requirements, configuration instructions, and
operating instructions for the CCS-UC-1 in a variety of environments and applications.
For information on installing the CCS-UC-1, refer to the CCS-UC-1 DO Guide (Doc. 7843)
at www.crestron.com/manuals
.
Requirements
Administrator
This document is written for use by a facility’s Information Technology (IT)
administrator. The IT administrator should have the following knowledge and skills:
• General Skills
− IP Networking
− Basic PC Operation and Administration
− Basic Smartphone and Tablet Operation
− VoIP system administration (including SIP device management)
− Calendaring system administration (for Exchange connectivity)
• Crestron-specific skills
− Crestron Fusion® software (if applicable)
− Crestron XiO Cloud™ service
To Next Page
Need help?
General
