113D-Link DIR-890L User Manual
Section 4 - Conguration - Access Point Mode
DIR-890L HW:A1 FW:1.10
System
This page lets you save your router’s current settings to a le, restore your settings from a le, restore your
router to factory default settings, or reboot the device. Please note that restoring the settings to the factory
defaults will erase all settings, including any rules you have created.
Management >> System
Save
System
Auto Reboot Conguration
System
Save Conguration To Local Hard Drive: Save
Load Settings From Local Hard Drive:
Select File
Restore To Factory Default Settings:
Restore
Reboot The Device: Reboot
Auto Reboot:
Never
⌵
COPYRIGHT © 2016 D-Link
Auto Reboot Conguration
Reboot The Device: Reboot
Auto Reboot:
Daily
⌵
Time: 00
⌵
00
⌵
(Hour/ Minute)
Auto Reboot Conguration
Reboot The Device:
Reboot
Auto Reboot:
Weekly
⌵
Date: Mon
⌵
Time: 00
⌵
00
⌵
(Hour/ Minute)
System
Save Settings To
Local Hard Drive:
This option allows you to save the current router conguration settings
to a le on your computer.
Load Settings
From Local Hard
Drive:
This option allows you to load a previously saved router conguration
le. This will overwrite the router’s current conguration.
Restore To Factory
Default Settings:
This option allows you to restore all conguration settings back to the
settings that were in eect at the time the router was shipped from the
factory. Any settings that have not been saved will be lost, including
any rules that you have created. If you want to save the current router
conguration settings, use the Save Settings To Local Hard Drive
button above.
Auto Reboot Conguration
Reboot The
Device:
Click to reboot the router immediately.
Auto Reboot: You may set the DIR-890L to automatically reboot at a set time. The
options are Never, Daily, Weekly. You may set the hour using a 24
hour format, the minute, and the day you wish to have the DIR-890L
automatically reboot.
Click Save when you are done.
System
This page allows you to save the DIR-890L’s current conguration, load a previously saved
conguration, reset the router to its factory default settings, or reboot the DIR-890L.
From the Admin page, click System. To return to the Admin page, click Admin.
SettingsHome Management