EasyManuals Logo

D-Link AC3200 Ultra User Manual

D-Link AC3200 Ultra
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background image
91D-Link DIR-890L User Manual
Section 4 - Conguration - Router Mode
DIR-890L HW:A1 FW:1.10
Admin
The admin account can change all router settings. To keep your router secure, you should give the admin
account a strong password.
Settings FeaturesHome Management
Management >> Admin
Save
Admin Password
Password: *******
Enable Graphical Authentication (CAPTCHA)
Disabled
System
Advanced Settings ...
COPYRIGHT © 2016 D-Link
Administration
Enable HTTPS Server:
Enabled
Enable Remote Management:
Enabled
Remote Admin Port: 8081 Use HTTPS:
Enabled
Admin
This page will allow you to change the administrator (Admin) password and enable remote
management. In the Management menu on the bar on the top of the page, click Admin. To
load, save, reset settings, or reboot the router, click System and refer to System on page 92.
Admin Password
Password: Enter a new password for the administrator account. You will need to
enter this password whenever you congure the router using a web
browser.
Enable Graphical
Authentication
(CAPTCHA):
Enables a challenge-response test to require users to type letters or
numbers from a distorted image displayed on the screen to prevent
hackers and unauthorized users from gaining access to your routers
network settings.
Advanced Settings - Administration
Enable HTTPS
Server:
Check to enable HTTPS to connect to the router securely. Instead of using
http://dlinkrouter.local./, you must use https://dlinkrouter.local./ to
connect to your router.
Enable Remote
Management:
Remote management allows the DIR-890L to be congured from the
Internet by a web browser. A password is still required to access the web
management interface.
Remote Admin
Port:
Enter the port number you wish to use to access the DIR-890L's web
conguration utility. Example: http://x.x.x.x:8080 where x.x.x.x is the
Internet IP address of the DIR-890L and 8080 is the port used for the web
management interface.
Note: If you enabled HTTPS Server and wish to access the router remotely
and securely, you must enter https:// at the beginning of the address.
Click Save when you are done.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link AC3200 Ultra and is the answer not in the manual?

D-Link AC3200 Ultra Specifications

General IconGeneral
Max Data Rate3200 Mbps
LAN Ports4 x Gigabit Ethernet
WAN Port1 x Gigabit Ethernet
USB Ports1 x USB 3.0, 1 x USB 2.0
Antennas6 x External Antennas
Memory128 MB Flash, 256 MB RAM
Wireless StandardIEEE 802.11ac
Frequency Bands2.4 GHz, 5 GHz
ProcessorDual-core processor
Security FeaturesWPA/WPA2

Related product manuals