D-Link AC3200 Ultra User Manual

83D-Link DIR-890L User Manual
Section 4 - Conguration - Router Mode
Status Name DestNetwork PrexLen Gateway Metric Interface Edit Delete
DIR-890L HW:A1 FW:1.10
Features >> Static Routes >> IPv6
Static Routes
Once connected to the Internet, your router automatically builds routing tables that determine where trafc
should be sent. Static routes can override this process, allowing trafc to be directed to a specic client or
location.
Settings FeaturesHome Management
IPv4
Save
Remaining: 24
Add Rule
COPYRIGHT © 2016 D-Link
IPv6
To congure IPv6 rules, on the Static Routes page click IPv6. To return to the main IPv4 static
routes page, click IPv4.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish
to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule,
click the Add Rules button. Click Save when you are done. If you edit or create a rule, the
following options will appear:
Create New Rule
Name: Enter a name for the rule.
DestNetwork: This is the IP address of the router used to reach the specified
destination.
PrexLen: Enter the IPv6 address prex length of the packets that will take this
route.
Gateway: Enter your next hop gateway to be taken if this route is used.
Metric: Enter the metric value for this rule here.
Interface: Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click Save when you are done.
Name:
DestNetwork:
PrexLen:
Gateway:
Metric:
Interface:
WAN
⌵
Create New Route
Apply

D-Link AC3200 Ultra Specifications

General

Brand	D-Link
Model	AC3200 Ultra
Category	Wireless Router
Language	English