D-Link AC3200 Ultra User Manual

86D-Link DIR-890L User Manual
Section 4 - Conguration - Router Mode
Quick VPN
DIR-890L HW:A1 FW:1.10
Features >> Quick VPN
Quick VPN
Quickly and easily create a prole for secure remote access to a Local Area Network (LAN). This prole can
be used to congure other devices to connect to your LAN via a secure VPN tunnel.
Settings FeaturesHome Management
Save
L2TP over IPsec:
Enabled
Username:
VPN_Username
Password:
A_Str0nG_P@ssW0rd!%!
PSK:
A_Str0nG_P@ssK3y!%!
Save Conguration To Local Hard Drive:
Save
General
Username: MSCHAPv2
⌵
MPPE: RC4-128
⌵
Advanced
Advanced Settings ...
COPYRIGHT © 2016 D-Link
This page will help you congure the Quick VPN feature of your router. For more information
refer to Quick VPN on page 165. Before proceeding, ensure that your Internet connection
is working properly. We recommend conguring Dynamic DNS before proceeding with
Quick VPN setup. If your router is assigned an IP address from your ISP using DHCP, it may
frequently change, requiring clients credentials to be set up again and a simple DDNS address
will be easier than an IP address.
Congure the following options:
L2TP over IPSec: Enable or disable the Quick VPN server.
If you enable Quick VPN, the following options are available:
Username: . Enter a username between 1 and 15 characters
Password: Enter a password between 1 and 15 characters.
PSK: Enter a passkey between 6 and 64 characters.
Save
Conguration To
Local Hard Drive:
For Apple iOS devices and OS X: From a computer browser click
this button to export a prole to simplify setup. E-mail this le as an
attachment to your Apple mobile device or open the le in OS X.
Authentication
Protocol:
Choose the authentication protocol type: MSCHAPv2, PAP, or CHAP.
MSCHAPv2 is the default.
MPPE: Select the encryption cipher strength: none, RC4-40, or RC4-128.
RC4-128 is the default.
Click Save when you are done.

D-Link AC3200 Ultra Specifications

General

Brand	D-Link
Model	AC3200 Ultra
Category	Wireless Router
Language	English