51D-Link DIR-890L User Manual
Section 3 - Conguration
Wireless
Smart Connect
Enable Smart Connect to allow the router to automatically assign your wireless clients to the best available wireless band. When enabled, the 2.4GHz
and both 5GHz bands will have the same Wi-Fi name and password.
From the Settings menu, click Wireless to begin wireless conguration. You will see the Wi-Fi Name (SSID) and Password for both the 2.4GHz and
5GHz bands. Click Advanced Settings... to expand the list and allow you to view all elds corresponding with each frequency band.
Create a Wi-Fi Name for your wireless network using up to 32
characters.
Create a Password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Select None, WEP, or WPA/WPA2-Personal (recommended).
Select the desired wireless transmission power (High, Medium or
Low).
Use the drop-down menu to select a schedule for enabling the rule.
The schedule may be set to Always Enable, or you can create your
own schedules in the Schedules section (refer to page 73).
Click Save when you are done.
Wi-Fi Name
(SSID):
Password:
Security Mode:
Transmission
Power:
Schedule:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
