55D-Link DIR-890L User Manual
Section 3 - Conguration
Network
Enter the LAN IP Address of the router. The default IP address is
192.168.0.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
conguration utility.
Enter the Subnet Mask of the router. The default subnet mask is
255.255.255.0.
The default address to access the router’s conguration utility is
http://dlinkrouter.local./ You may replace dlinkrouter with a name
of your choice by entering it into this eld.
Enter the Local Domain Name (optional).
If enabled, your computers will use the router for a DNS server.
Disable to transfer the DNS server information from your ISP to your
computers.
Enable or disable the DHCP server.
Enter the starting and ending IP addresses for the DHCP server’s IP
assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conict.
LAN IP Address:
Subnet Mask:
Management
Link:
Local Domain
Name:
Enable DNS
Relay:
Status:
DHCP IP
Address Range:
This section allows you to change the local network settings of the router and to congure the DHCP (Dynamic Host Control Protocol) settings. You
can enable the use of the DIR-890L as a DNS server. From the Settings menu, click Network.
Click Advanced Settings... to expand the list and see all of the available options.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
