D-Link Router User Manual

53D-Link DWR-961 User Manual
Section 3 - Conguration
LAN
LAN Settings
This section will help you to change the local network settings of your router and to congure the DHCP Server settings.
LAN
IP Address: Enter the IP address you want to use for the router. The default
IP address is 192.168.0.1. If you change the IP address, you will
need to enter the new IP address in your browser to get into the
conguration utility.
Subnet Mask: Enter the subnet mask of the router. The default subnet mask is
255.255.255.0.
Local Domain
Name::
Enter the local domain name for your network. (Optional)
DNS Relay: Disable to transfer the DNS server information from your ISP to
your computers. If enabled, your computers will use the router for
a DNS server.
DHCP Setting
DHCP Option: Select Disable, DHCP Server. or DHCP Relay. DHCP Server is
the default and recommended setting, where your router will
serve as the DHCP server for your LAN.
IP Pool
Starting
Address:
Enter rst address in the range of IPs the DHCP server will use to
assign IP addresses to devices on your network.

D-Link Router Specifications

General

Brand	D-Link
Model	Router
Category	Network Router
Language	English