103D-Link ShareCenter DNS-325 User Manual
Section 4 - Conguration
Network Management
LAN Setup
The LAN Settings allows you to enable LLTD and to congure the Link Speed and the IP address as a DHCP client or Static IP.
DHCP Client: Selecting DHCP Client will cause the DNS-325 to obtain an IP address
from the local DHCP server.
Static IP: Selecting Static IP requires you to assign the IP information for the
DNS-325 manually.
IP Address: Enter an IP address for your device. The IP address of each device
on the local area network must be within the same IP address range
and subnet mask.
Subnet Mask: Enter the Subnet Mask. The default subnet mask is 255.255.255.0.
Gateway IP
Address:
Enter the Gateway IP Address for the device. The Gateway IP Address
is almost always the LAN address of your router. Most D-Link routers
have a default LAN IP address of 192.168.0.1.
DNS1/ DNS2: Specify the rst and second DNS Addresses for the device. The rst
DNS address is usually the LAN address of your router. A DNS Address
will allow the device to resolve names into IP addresses. Click Save
Settings when nished
IP Settings
To Next Page
Loading...
Need help?
General
