224D-Link ShareCenter DNS-325 User Manual
Section 5 - Knowledge Base
Knowledge Base
What is RAID?
RAID, short for Redundant Array of Independent Disks, is a combination of two or more disks with the aim of providing fault tolerance and improving
performance. There are several dierent levels of RAID, with each one providing a dierent method of sharing or distributing data among the drives.
The device supports Standalone, JBOD, RAID 0, and RAID 1.
Standard provides a single volume for each
drive.
Although performance is improved, the lack of
any RAID or mirroring means that if one drive
fails, all data on the volume will be lost.
Standard
JBOD JBOD allows you to create a large virtual disk drive by
concatenating two or more smaller drives together.
It oers no redundancy and limited data protection..