D-Link ShareCenter DNS-325 User Manual

11D-Link ShareCenter DNS-325 User Manual
Section 1 - Product Overview
D-Link Storage Utility
When rst powered on, during the initial boot sequence, the ShareCenter™ will wait to be assigned an IP address via DHCP. If
it does not receive a DHCP assigned IP address, the ShareCenter will be automatically assigned a 169.254.xxx.xxx. address. It
is recommended that you use the included D-Link Storage Utility software when accessing and conguring the ShareCenter
for the rst time. If you want to change the IP address before logging in or you have trouble connecting to the ShareCenter IP
address, you can then use the Storage Utility software included on the product CD to locate the device on your network and
make any necessary changes.
Network Storage
Device:
The D-Link Storage Utility displays any ShareCenter devices
it detects on the network.
Refresh: Click Refresh to refresh the device list.
Conguration: Click Conguration to access the web-based conguration
of the ShareCenter.
LAN: Congure the LAN Settings for the ShareCenter here.
Apply: Click Apply to save changes to the LAN Settings.
Connect: Click Connect to connect to the iSCSI target.
Management: Click Management to edit the information.
Drive Mapping: Volumes available for mapping are displayed here.
Available Drive Letters: Choose an available drive letter. Click Connect to map the
selected volume. Click Disconnect to disconnect the selected
mapped volume.
About: Click About to view the software version of the Easy Search
Utility.
Exit: Click Exit to close the utility.

D-Link ShareCenter DNS-325 Specifications

General

Brand	D-Link
Model	ShareCenter DNS-325
Category	Network Hardware
Language	English