EasyManuals Logo

D-Link ShareCenter DNS-345 User Manual

D-Link ShareCenter DNS-345
384 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #249 background imageLoading...
Page #249 background image
244D-Link ShareCenter DNS-345 User Manual
Section 4 - Conguration
USB Devices
To enable Network UPS to your NAS (Network Slave Mode):
1. Click to enable the Network UPS.
2. Enter an IP address of the Network UPS Master.
3. Click Save Settings to receive the critical power status from the
network UPS master.
The UPS Status will display the current status of your UPS.
Note: Make sure that the ShareCenter is in the same network as the
network UPS master.
If a UPS device is connected to the USB port on your NAS, you can select either Stand-Alone or Master mode. If you select Master mode, you will have
to enter the IP address(es) of the network UPS slaves to notify them in the event of a power failure. For more details, refer to the UPS Connectivity
section.
Click the blue arrow to reveal the USB storage Information.
It displays information on the manufacturer, product name, and size
(capacity).
Click the Unmount button to eject the USB device.
UPS Settings
Network UPS is a system management feature that uses a local UPS to protect your NAS from an abnormal shutdown due to a power failure.
USB Storage Information

Table of Contents

Other manuals for D-Link ShareCenter DNS-345

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link ShareCenter DNS-345 and is the answer not in the manual?

D-Link ShareCenter DNS-345 Specifications

General IconGeneral
BrandD-Link
ModelShareCenter DNS-345
CategoryNetwork Hardware
LanguageEnglish

Related product manuals