Daikin Super Multi NX C-Series User Manual

SiE12-411 Instruction
System Configuration 143
2.11 TIMER Operation
Notes
Timer functions are useful for automatically
switching the air conditioner on or off at night or in
the morning. You can also use OFF TIMER and ON
TIMER in combination.
" To use OFF TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time.
1. Press “OFF TIMER button”.
0:00 is displayed.
blinks.
2. Press “TIMER Setting button until the time
setting reaches the point you like.
• Every pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the
setting rapidly.
3. Press “OFF TIMER button” again.
• The TIMER lamp lights up.
" To cancel the OFF TIMER operation
4. Press “CANCEL button”.
• The TIMER lamp goes off.
C
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FAN
SWING
SILENT SENSOR
ON CANCEL
OFF
4
2
1.3
ON
OFF
• When TIMER is set, the present time is not displayed.
• Once you set ON, OFF TIMER, the time setting is kept in the memory. (The memory is canceled
when remote control batteries are replaced.)
• When operating the unit via the ON/OFF Timer, the actual length of operation may vary from the
time entered by the user. (Maximum approx. 10 minutes)
" NIGHT SET MODE
When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting
(0.5°C up in COOL, 2.0°C down in HEAT) to prevent excessive cooling (heating) for your pleasant
sleep.

Daikin Super Multi NX C-Series Specifications

General

Brand	Daikin
Model	Super Multi NX C-Series
Category	Air Conditioner
Language	English