Daikin Super Multi NX C-Series User Manual

Instruction SiE12-411
144 System Configuration
ATTENTION
" To use ON TIMER operation
• Check that the clock is correct. If not, set the
clock to the present time.
1. Press “ON TIMER button”.
7:00 is displayed.
blinks.
2. Press “TIMER Setting button” until the time
setting reaches the point you like.
• Every pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the
setting rapidly.
3. Press “ON TIMER button” again.
• The TIMER lamp lights up.
" To cancel ON TIMER operation
4. Press “CANCEL button”.
• The TIMER lamp goes off.
" To combine ON TIMER and OFF TIMER
• A sample setting for combining the two timers is
shown below.
ON
OFF
C
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FAN
SWING
SILENT SENSOR
ON CANCEL
OFF
2
1.3
4
Display
(Example)
Combined
Present time: 11:00 PM
(The unit operating)
OFF TIMER at 0:00 a.m.
ON TIMER at 7:00 a.m.
" In the following cases, set the timer again.
• After a breaker has turned OFF.
• After a power failure.
• After replacing batteries in the remote control.

Daikin Super Multi NX C-Series Specifications

General

Brand	Daikin
Model	Super Multi NX C-Series
Category	Air Conditioner
Language	English