H1P input shaft - Option G9 (SAE C-C, 23 teeth)
Option G9, ISO 3019-1, outer dia 38 mm-4 (SAE C-C, 23 teeth)
Ø37.59 ±0.09
[1.480 ±0.004]
Ø33.6 ±0.25
[1.323 ±0.010]
8.05 ±0.8
[0.317 ±0.031]
Mounting flange surface
Flange 127 - 4 per ISO 3019-1
To be paint free
Coupling must not
protrude beyond
this surface
Spline data
Number of teeth : 23
Pitch fraction : 16/32
Pressure angle : 30°
Pitch-ø : ø36.513 [ø1.438]
typ of fit : Flat root, side fit
Per : Ansi B92.1-1996 Class 5
54 ±1
[2.126 ±0.039]
40.5 ±1
[1.594 ±0.039]
P003 264E
Specifications
Option
G9
Spline
23 teeth, 16/32 pitch
Min. active spline length
1)
40.33 mm [1.588 in]
Torque rating
2)
Rated
999 N•m [8840 lbf•in]
Maximum
1818 N•m [16 090 lbf•in]
1)
Minimum active spline length for the specified torque ratings.
2)
For definitions of maximum and rated torque values, refer to Basic Information 11062168, section Shaft Torque
Ratings and Spline Lubrication.
Technical Information H1 Axial Piston Single Pumps, Size 069/078
Dimensions
40 11062169 • Rev 0700 • November 2015
To Next Page
Loading...
Need help?
General
