Fan Drive Control (FDC), option F1 (12V) / F2 (24V)
110.9 ±1.2
178.86 ±2.5
94.7 ±0.8
Mounting flange
Mounting flange
Shaft
C
L
Shaft
C
L
Shaft
C
L
138.29 ±1.2
Control solenoid connector "C1"
Deutsch DT04-2P
Paint free
Control solenoid connector "C1"
Deutsch DT04-2P
Paint free
Case gauge port "M14"
Port ISO 1926-1 - 7/16-20
152.86 ±1.2
64.2 ±0.8
104.5 Max
P700 52 604_D09
This control is for Fan Drive systems only!
Use in other systems could result in unintended
movement of the machince or its elements.
Loss of the input signal to this control will
cause the pump to produce maximum flow.
Contact Danfoss or an autorized distributor
with questions regarding the use of this product.
WARNING
Control solenoid connector C1 and C2:
Pin Assignment Alternative Pin Assignment
1 Supply OR 1 Ground
2 Ground 2 Supply
Please contact Danfoss Power Solutions representative for specific installation drawings.
Technical Information
H1 Axial Piston Single Pumps, Size 069/078
Controls
11062169 • Rev 0700 • November 2015 63
To Next Page
Loading...
Need help?
General
