Danfoss H1 Technical Information

H1P 069/078 Manual Displacement Control (MDC) with NSS, option M2
70052604-D11
Mounting flange
50.7±0.8
68.5±0.8
73.7±0.8
101.1±0.8
2x22±0.5
220.26±2.5
178.16±1.2
2x24±0.5
7.5±1°
3x11
-0.02
-0.08
4x M6x1-6H thd.
9 min. full thd. depth
paint free
Neutral Start Switch connector:
Deutsch DT04-2P
paint free
Case gauge port M14
ISO 11926-1 -7/16-20
Shaft
Control handle shaft
Shaft
9.9
+1
0
Neutral Start Switch connector:
Pin Assignment Pin Assignment
1 Supply OR 1 Ground
2 Ground 2 Supply
Please contact Danfoss Power Solutions representative for specific installation drawings.
Technical Information
H1 Axial Piston Single Pumps, Size 069/078
Controls
11062169 • Rev 0700 • November 2015 57

Danfoss H1 Specifications

General

Brand	Danfoss
Model	H1
Category	Water Pump
Language	English