Danfoss H1 Technical Information

Non Feedback Proportional Electric control (NFPE) with Angle Sensor
P70052604-D14
73.45 ± 0.1
2x 138.29 ±1.2
159.36 ±1.2
2x 152.86 ±1.2
180.66 ±2.5
209 max
128.4 ±1.2
64.2 ±0.828.8 ±0.8
Shaft
L
C
Shaft
L
C
Mounting flange
Angle sensor connector:
Deutsch DTM04-4P
Paint free
Angle sensor connector:
Deutsch DTM04-4P
Paint free
Control manual override “C1”
Depressing the plunger mechanically
moves the control spool. Actuation
allows full stroke pump response as
per coil and rotation dependent
control logic.
Control solenoid connector “C2”
Deutsch DT04-2P
Paint free
Control manual override “C2”
Depressing the plunger mechanically
moves the control spool. Actuation
allows full stroke pump response as
per coil and rotation dependent
control logic.
Control solenoid connector “C1”
Deutsch DT04-2P
Paint free
Plug removing can cause
contermination issues
Neutral switch connector:
Deutsch DT04-2P
Paint free
Control solenoid connector “C2”
Deutsch DT04-2P
Paint free
Control solenoid connector “C2”
Pin Assignment
or
Pin Assignment
1 Supply 1 Ground
2 Ground 2 Supply
1
2
4 1
3 2
Angle sensor connector
Pin Assignment
1 Ground
2 Signal output 2
3 Signal output 1
4 Supply (+)
Please contact Danfoss Power Solutions representative for specific installation drawings.
Technical Information
H1 Axial Piston Single Pumps, Size 069/078
Controls
11062169 • Rev 0700 • November 2015 61

Danfoss H1 Specifications

General

Brand	Danfoss
Model	H1
Category	Water Pump
Language	English