Danfoss VLT AHF 005 Instruction Manual

Contents
1 Introduction
4
1.1 Purpose of the Manual
4
1.2 Additional Resources
5
1.3 Document and Software Version
5
1.4 Approvals and Certications
5
2 Safety
6
2.1 Safety Symbols
6
2.2 Qualied Personnel
6
2.3 Safety Precautions
6
2.3.1 Safe Torque O (STO) 7
3 Mechanical Installation
8
3.1 How to Get Started
8
3.2 Pre-installation
8
3.2.1 Planning the Installation Site 8
3.2.2 Receiving the Adjustable Frequency Drive 9
3.2.3 Transportation and Unpacking 9
3.2.4 Lifting 9
3.2.5 Mechanical Dimensions 12
3.2.6 Rated Power 16
3.3 Mechanical Installation
17
3.3.1 Tools Needed 17
3.3.2 General Considerations 17
3.3.3 Terminal Locations - E Enclosures 18
3.3.4 Terminal Locations - Enclosure type F 24
3.3.5 Cooling and Airow 28
3.3.6 Gland/Conduit Entry - IP21 (NEMA 1) and IP54 (NEMA12) 30
3.4 Field Installation of Options
31
3.4.1 Installation of Duct Cooling Kit in Rittal Enclosures 31
3.4.2 Installation of Top-only Duct Cooling Kit 32
3.4.3 Installation of Top and Bottom Covers for Rittal Enclosures 33
3.4.4 Installation of Top and Bottom Covers 33
3.4.5 Outside Installation/NEMA 3R Kit for Rittal Enclosures 34
3.4.6 Outside Installation/NEMA 3R Kit for Industrial Enclosures 34
3.4.7 Installation of IP00 to IP20 Kits 35
3.4.8 Installation of IP00 E2 Cable Clamp Bracket 35
3.4.9 Installation of Line Power Shield for Adjustable Frequency Drives 35
Contents Instruction Manual
MG11F522 Danfoss A/S © 08/2014 All rights reserved.

Danfoss VLT AHF 005 Specifications

General

Brand	Danfoss
Model	VLT AHF 005
Category	DC Drives
Language	English