Danfoss VLT AutomationDrive FC 302 User Manual

8.1.8 Wiring Configuration: External Alarm Reset
Table 89: Wiring Configuration for External Alarm Reset
Parameter
+24 V
+24 V
D IN
D IN
D IN
COM
D IN
D IN
D IN
D IN
e30bu088.11
XD2.10
XD2.11
XD2.12
XD2.13
XD2.18
XD2.14
XD2.15
XD2.16
XD2.17
XD2.19
Function
Setting
Parameter 5-14 Terminal 32 Digital Input
[1] Reset
*=Default value
Notes/comments:
D IN 37 is an option.
Terminal 32 in the parameter title corresponds to terminal XD2.16 in the control compartment.
8.1.9 Wiring Configuration: RS485
Table 90: Wiring Configuration for RS485 Network Connection
Parameters
e30bu089.10
XD2.10
XD2.11
XD2.12
-
RS485
+
Function
Setting
Parameter 8-30 Protocol
FC*
Parameter 8-31 Address
1*
Parameter 8-32 Baud Rate
9600*
*=Default value
Notes/comments:
Select protocol, address, and baud rate in the above-mentioned parameters.
D IN 37 is an option.
AQ262139143212en-000301 / 130R0879 | 131Danfoss A/S © 2021.10
Wiring Configuration Examples
VLT® AutomationDrive FC 302
Operating Guide

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English