10 Specifications
10.1 Electrical Data
10.1.1 Electrical Data, 380–500 V AC
Table 101: Electrical Data, Mains Supply 3x380–500 V AC
High/normal overload
High overload=150% or 160% torque for a duration of 60 s. Normal
overload=110% torque for a duration of 60 s.
Typical shaft output at 400 V [kW]
Typical shaft output at 460 V [hp]
Typical shaft output at 500 V [kW]
Continuous (at 400 V) [A]
Intermittent (60 s overload) (at 400 V) [A]
Continuous (at 460/500 V) [A]
Intermittent (60 s overload) (at 460/500 V) [A]
Continuous kVA (at 400 V) [kVA]
Continuous kVA (at 460 V) [kVA]
Continuous kVA (at 500 V) [kVA]
Continuous (at 400 V) [A]
Continuous (at 460/500 V) [A]
Maximum number and size of cables per phase
- Mains with disconnect [mm
2
(AWG)]
- Mains with fusible disconnect [mm
2
(AWG)]
- Mains with contactor [mm
2
(AWG)]
Drive module power loss at 400 V [W]
(1)(2)(3)
Drive module power loss at 460 V [W]
(1)(2)(3)
Heat sink overtemperature trip [°C (°F)]
AQ262139143212en-000301 / 130R0879 | 161Danfoss A/S © 2021.10
Specifications
VLT® AutomationDrive FC 302
Operating Guide
To Next Page
Loading...
Need help?
General