Danfoss VLT AutomationDrive FC 302 User Manual

4.6
4.7
4.8
4.9
4.10
4.11
4.11.1
4.11.2
4.11.3
5
5.1
5.2
5.3
5.4
5.5
5.6
5.6.1
5.6.2
5.6.3
5.6.4
5.6.5
5.7
5.7.1
5.7.2
5.7.3
5.7.4
5.7.5
5.7.6
5.8
5.8.1
5.8.2
5.8.3
5.8.4
5.8.5
5.8.6
5.9
5.9.1
Installation Requirements 41
Cooling Requirements 42
Airflow Rates 42
Lifting the Drive 44
Combining Multiple Cabinets from a Split Shipment 44
Installing the Enclosed Drive 46
Creating an Entry for Cables 46
Installing the Drive with Back-channel Cooling Option 46
Securing the Cabinet(s) to the Floor 47
Electrical Installation 49
Safety Instructions 49
EMC-compliant Installation 50
Wiring Overview for D9h and D10h Enclosed Drives 53
Wiring Overview for E5h and E6h Enclosed Drives 54
Control Terminal Wiring Diagram Cross-reference 55
Split Shipment Wiring Harnesses 56
Connecting Wiring Harnesses 56
Cable Routing 57
D10h Wiring Harness 65
E5h Wiring Harness 69
E6h Wiring Harness 75
Control Compartment Wiring 81
Safety Precautions 81
Control Compartment Interior View 82
Control Terminals 83
Relay Terminals 84
Option Card Terminals 84
Control Compartment Options 91
Connecting Motor, Mains, and Ground Cables 99
Power Cabling and Grounding Considerations 99
Connecting to the Mains 100
Connecting the Drive Module to the Motor 102
Connecting the Sine-wave Filter to the Motor 104
Connecting the dU/dt Filter to the Motor 105
Connecting to Ground 107
Installing Upstream Fuses 108
Upstream Fuse Considerations 108
AQ262139143212en-000301/130R08794 | Danfoss A/S © 2021.10
Contents
VLT® AutomationDrive FC 302
Operating Guide

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English