CE870 Instant Issuance System Installation and Administrator’s Guide 19
6. Replace the topping foil cartridge.
a. Hold the cartridge by its handle.
b. Align the top of the cartridge with the
guides inside the embosser.
c. Slide the cartridge in until it clicks and stops.
7. Close and lock the embosser supplies access
door.
Load the Cleaning Sleeve
The printer component uses a replaceable cleaning sleeve to remove dust and other particles
from cards before they travel into the printer. The cleaning sleeve fits on a spindle that mounts on
the print ribbon cartridge. The printer ships with the cleaning roller spindle in the accessory box.
Replace the cleaning sleeve when you clean the printer, if you notice debris on the finished card,
or if the cleaning sleeve is no longer sticky.
1. Unlock the printer (and open the
printer supplies access door on the
multi-hopper).
Printer Supplies
Access Door
To Next Page
Loading...
Need help?
General
