DataCard CE840 Installation And Administrator's Guide

CE870 Instant Issuance System Installation and Administrator’s Guide 85
Pick
The Pick settings define how cards are picked from the input hopper. Pick settings are available
for WebService access-level users only. Contact your service provider for information about
changing the printer’s pick settings.
Transport
The Transport options allow you to set values for card travel through the printer.
Change settings as needed, and then click Set Current to apply changes.
 TransMedSpeed—The speed at which the transport motor runs when clearing errors. You
cannot change this value.
Flipper
The Flipper settings define values for the duplex module in duplex-option printers. Flipper
settings are available for WebService access-level users only. Contact your service provider for
assistance if you need to change the printer’s flipper settings.
Description Default Value Current Value (unit)
Allowed
Range
1) TransMedSpeed 800 800 [300 – 1800]

DataCard CE840 Specifications

General

Brand	DataCard
Model	CE840
Category	Printer
Language	English