Exit and Save Configuration
FIELD ADJUSTMENT
disable field adjustment
ÌEF0[Î
Field adjustment allows a number of characters n, to be added to or subtracted from the
barcode read. The adjustment can be different for each enabled code type. To
define
Read the enable field adjustment code:
the field
adjustment:
Select the code type from the Code Identifier Table B in Appendix .
Select the type of adjustment to perform:
left addition
right deletion
left deletion
Read a number in the range 01 - 32 from the Hex/Numeric Table to define how many
characters to add or delete:
Conditions:
• Adjustment is only performed on the barcode data, the Code Identifier and Code Length
Transmission fields are not modified by the field adjustment parameter.
• If the field setting would subtract more characters than exist in the barcode, the subtraction
will take place only to code length 0.
• You can set up to a maximum of 10 different field adjustments on the same barcode family
or on different barcode families.
Example:
To add 4 characters to the right of Standard Code 39 Codes:
enable field adjustment
Code 39
right addition
Read
+
+
+
04
To Next Page
Loading...
Need help?
General
