Datalogic PowerScan PD96 Series User Manual

ARROW DOWN STRING (4-KEY MODELS ONLY) ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 231
ACTION CONFIGURATION FOR FUNCTION KEYS
Configure actions for the function keys.
Table 6 - Default Action Keys
To configure the following features, follow the procedure below:
1. Scan the ENTER/EXIT PROGRAMMING MODE bar code above.
2. Scan the bar code for the Function Key you want to program.
3. Determine the CMD_ID number from Table 5 on page 230.
4. Scan the corresponding 2 digits from the Alphanumeric characters in
Appendix D,
Keypad
.
5. End the procedure by scanning the ENTER/EXIT bar code again.
16K 4K
F1
07 Backlight 02 String 1
F2
0E Dot char 03 String 2
F3
09 Backspace CMD N.A.
F4
08 Clear N.A.
Shift
10 Shift N.A.
$CKF11
Configures Action for F1
Configures Action for F2
$CKF21
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

Datalogic PowerScan PD96 Series Specifications

General

Brand	Datalogic
Model	PowerScan PD96 Series
Category	Barcode Reader
Language	English