ENTER/EXIT PROGRAMMING MODE WIRELESS FEATURES
262
POWERSCAN™ PD/PM96XX
CONFIGURATION UPDATES
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can automatically
ensure they stay in sync with regard to application hardware and/or configuration. See
page 299 for more information on this feature.
Copy Configuration to Reader
Scan the following label to copy the current Base Station configuration to the reader.
Use this method when the Auto Configuration Update feature is disabled and you want
a one-time configuration update to be performed on the reader.
Copy Configuration to Reader
Copy Configuration to Base Station
Scan the following label to copy the current reader configuration to the Base Station.
Use this method when the Auto Configuration Update feature is disabled and you want
a one-time configuration update to be performed on the Base Station.
Copy Configuration to Base Station
$CBTCU00
Automatic Configuration Update = Disable
Automatic Configuration Update = Enable
$CBTCU01
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
To Next Page
Loading...
Need help?
General
