H-Class 11
2.2.3 Connecting to the SDIO Slot and USB Host Ports
If equipped, the Secure Digital Input Output (SDIO) Slot and the USB Host Ports accept
external storage devices for fonts, graphics, label formats, and firmware upgrades.
Additionally, USB Host Ports accept a USB keyboard for stand alone direct data (template)
applications; see the Class Series Programmer’s Manual.
;
•
External memory devices must be formatted before initial use (see MODULES,
Section 4.2.3); afterward, to be recognized all files must be placed into the
resulting folder.
• Use Windows Explorer or DMX Config (see the Accessories CD-ROM) to
download files to an external memory device for conversion; see FILE
HANDLING DEFINITIONS, Appendix A.
• SDIO Slot Connections:
When installing an SDIO Card, turn OFF the printer then slide the card into the SDIO
Slot. After turning ON the printer, Module F will be recognized.
When removing an SDIO Card, turn OFF the printer then press the SDIO Card inward
to release.
;
•
SanDisk© SDIO Memory Cards up to 1 GB are supported.
• Multi Media Cards SDIO cannot be used; also, unsupported or defective
cards may prevent printer operation.
To Next Page
Loading...
Need help?
General