H-Class 33
• The Navigation Buttons access menu items and parameters, where the highlighted
item on the display is selectable (by pressing Enter) or selected (e.g., a default
setting).
;
Press and hold the Menu Button to adjust the display contrast then release the
button when the desired appearance has been achieved.
4.2 The Menu System
The menu system is composed of seven branches:
MEDIA SETTINGS
PRINT CONTROL
PRINTER OPTIONS
SYSTEM SETTINGS
COMMUNICATIONS
DIAGNOSTICS
MCL OPTIONS
;
•
Entering the menu system takes the printer off-line and halts the processing of
new data.
• Prompts may appear before menu access is granted and changes enacted; see
Section 5.1.1.
• The MENU MODE setting controls menu level access; see, Section 4.2.4.
• Host computer commands may, in some cases, override menu settings; see
Section 4.2.5.
• Depending upon the firmware and options, some of the menu selections
represented below may not appear in your printer and may indicate NOT
INSTALLED when accessed.
•
Throughout this text “displayed message” refers to the Printer Status Line or
the Main Display Area of the Control Panel (see Section 4.1).
To Next Page
Loading...
Need help?
General