Specifications
This section lists the N3200-ON Series switch specifications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).
NOTE: For RoHS information, see Restricted Material Compliance.
Topics:
• Chassis physical design
• IEEE standards
• Agency compliance
• Safety standards and compliance agency certifications
• Electromagnetic compatibility
• Product recycling and disposal
Chassis physical design
Table 12. Chassis physical design
Parameter Specifications
Height x Width x Depth, excluding the PSU and fan tray
handles
● N3208PX-ON:
○ 43.5 mm x 279.4 mm x 312 mm
○ 1.71 in x 11 in x 12.28 in (H x W x D)
NOTE: The N3208PX-ON can use one or two EPAs. To
install two EPAs, you must have 2RU rack space. Install
the two EPAs above the switch in the rack.
● All other N3200-ON Series switches:
○ 43.5 mm x 434 mm x 400 mm (H x W x D)
○ 1.71 in x 17.09 in x 15.75 in (H x W x D)
(PSU and fan tray handle adds 30 mm or 1.18 in)
Chassis weight with factory-installed components
● N3208PX-ON: 8.44 lbs (3.83 kg)—240 W
● N3224T-ON: 13.75 lbs (6.24 kg); PSU 1.75 lbs (0.79 kg)—
550 W
● N3224F-ON: 14.25 lbs (6.46 kg); PSU 1.75 lbs (0.79 kg)—
240 W
● N3224P-ON: 15.6 lbs (7.08 kg); PSU 2.0 lbs (0.90 kg)—
1050 W
● N3224PX-ON: 16.0 lbs (7.26 kg); PSU 2.0 lbs (0.90 kg)—
1600 W
● N3248TE-ON: 15.4 lbs (6.99 kg); PSU 1.75 lbs (0.79 kg)—
550 W
● N3248P-ON: 16.7 lbs (7.57 kg); PSU 2.0 lbs (0.90 kg)—
1050 W
● N3248X-ON: 16.1 lbs (7.30 kg); PSU 1.75 lbs (0.79 kg)—
550 W
● N3248PXE-ON: 17.6 lbs (7.98. kg); PSU 2.0 lbs (0.90 kg)
—1600 W
10
Specifications 77
To Next Page
Loading...
Need help?
General