Copying 325
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section18.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
2
Press the
(Copy)
button.
3
Press button until
Sharpness
is highlighted, and then press the
(Set)
button.
4
Press or button until the desired settings is highlighted, and then
press the
(Set)
button.
* Denotes the factory default setting.
5
Press the
(Start)
button to begin copying.
Color Saturation
To adjust the amount of colors of the copy to make the colors darker or lighter
than the original:
1
Load the document(s) facing up with top edge in first into the ADF.
OR
Place a single document facing down on the document glass, and close the
document cover.
For details about loading a document, see "Making Copies From the
Document Glass" and "Making Copies From the ADF."
2
Press the
(Copy)
button.
3
Press button until
Color Saturation
is highlighted, and then press
the
(Set)
button.
4
Press or button until the desired setting is highlighted, and then press
the
(Set)
button.
* Denotes the factory default setting.
Sharper Makes the copy image sharper than the original.
Normal* The color clarity of the image is the same as the original.
Softer Makes the copy image softer than the original.
High Makes the color of the copy more vivid.
Normal* The color saturation is the same as the original.
Low Makes the color of the copy less vivid.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
Weight and Dimensions
