Disk near full. Securely clearing disk space.
Try one or more of the following:
• From the printer control panel, press to clear the message.
• Delete fonts, macros, and other data stored in the printer hard disk.
• Install a printer hard disk with higher capacity.
Empty the hole punch box
1 Empty the hole punch box.
For more information, see the “Cleaning the printer” section of the User’s Guide.
2 Reinsert the hole punch box into the finisher, and then press on the printer control panel to clear the message.
Error reading USB drive. Remove USB.
An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.
Error reading USB hub. Remove hub.
An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
Imaging unit low [84.xy]
You may need to order an imaging unit. If necessary, press to clear the message and continue printing.
Imaging unit nearly low [84.xy]
If necessary, press on the printer control panel to clear the message and continue printing.
Imaging unit very low, [x] estimated pages remain [84.xy]
You may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” section of the
User’s Guide.
If necessary, press
on the printer control panel to clear the message and continue printing.
Incompatible output bin [x] [59]
Do either of the following:
• Remove the specified bin.
• From the printer control panel, press to clear the message and continue printing without using the specified
bin.
Troubleshooting 168
To Next Page
Loading...
Need help?
General