Dell B5460dn User Manual

Use To
SMTP Timeout
5–30
Specify the amount of time in seconds before the server stops trying to
send an e‑mail.
Note: 30 is the factory default setting.
Reply Address Specify a reply address of up to 128 characters in the e-mail sent by the
printer.
Use SSL
Disabled
Negotiate
Required
Set the printer to use SSL for increased security when connecting to the
SMTP server.
Notes:
• Disabled is the factory default setting.
• When the Negotiate setting is used, the SMTP server determines if
SSL will be used.
SMTP Server Authentication
No authentication required
Login/Plain
CRAM‑MD5
Digest‑MD5
NTLM
Kerberos 5
Specify the type of user authentication required for printing privileges.
Note: “No authentication required” is the factory default setting.
Device‑Initiated E‑mail
None
Use Device SMTP Credentials
Specify what credentials will be used when communicating to the SMTP
server. Some SMTP servers require credentials to send an e-mail.
Notes:
• None is the factory default setting for Device‑Initiated E‑mail and
User‑Initiated E‑mail.
• Device Userid and Device Password are used to log in to the SMTP
server when Use Device SMTP Credentials is selected.
Device Userid
Device Password
Kerberos 5 Realm
NTLM Domain
Security menu
Miscellaneous Security Settings menu
Use To
Login Restrictions
Panel Login Timeout
Remote Login Timeout
Limit the number and time frames of failed login attempts from the printer control
panel before all users are locked out.
Notes:
• Panel Login Timeout specifies how long the printer remains idle on the printer
control panel before automatically logging the user off. Select from 1 to 900
seconds. 30 seconds is the factory default setting.
• Remote Login Timeout specifies how long a remote interface remains idle
before automatically logging the user off. Select from 1 to 120 seconds. 10
minutes is the factory default setting.
Understanding the printer menus 99

Dell B5460dn Specifications

General

Brand	Dell
Model	B5460dn
Category	Printer
Language	English