Replacing the antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the antenna cables to the slots on chassis and adhere the antenna cables
to the chassis.
2 Replace the two screws (M3x5) that secures the antenna cables to the chassis.
3 Route the antenna cables through the routing guides on the chassis.
4 Place the computer in an upright position.
Post-requisites
1 Replace the wireless card.
2 Replace the right-side cover.
105
To Next Page
Loading...
Need help?
General
