Removing the top cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
Remove the right-side cover.
Procedure
1 Lay the computer on the left side and remove the screw (M3x5) that secures
the top cover to the chassis.
2 Slide the top cover towards the backside of the chassis and remove the top
cover from the chassis.
94
To Next Page
Loading...
Need help?
General
