Dell D27M User Manual

Removing the system board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
NOTE: Your computer’s Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTE: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the appropriate
changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables correctly
after you replace the system board.
Prerequisites
1 Remove the right-side cover.
2 Remove the memory module.
3 Remove the solid-state drive.
4 Remove the wireless card.
5 Remove the graphics card.
6 Remove the VR heat sink.
7 Remove the processor-cooling assembly or processor fan.
8 Remove the processor.
117

Dell D27M Specifications

General

Brand	Dell
Model	D27M
Category	Desktop
Language	English