Replacing the left-side cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the tabs on the left-side cover with the slots on the chassis and snap the
left-side cover to lock it in place.
2 Replace the two screws (M3x5) that secure the left-side cover to the chassis.
3 Place the computer in an upright position.
Post-requisites
Replace the right-side cover.
109
To Next Page
Loading...
Need help?
General
